WireTheSun

Solar panel sizing: start with daily energy

Turn appliance use and daily kWh into a solar planning starting point. Account for season, location, roof space and existing panels.

Start a solar plan →

Power is not the same as energy

Watts describe how much power an appliance draws while running. Watt-hours describe how much it uses over time: a 100 W load running for five hours uses 500 Wh. Add daily energy, rather than simply adding every appliance rating, before estimating the array.

Design for the season that matters

The same array produces different energy in winter and summer. Shade, orientation, temperature and conversion losses matter too. Tell the planner where the installation is, whether you retain grid supply and whether backup or everyday off-grid use is the goal. An estimate based on a sunny summer day is not a winter guarantee.

What WireTheSun does

Describe the loads or enter your daily kWh, then review the planner’s questions and assumptions. If panels are already installed, use the existing-panel option instead of treating them as new equipment. Keep module ratings and available space ready for your installer to check.

These tools support planning and discussion. An installer must check equipment ratings, protective devices, local requirements and the installation itself before work begins.

Practical planning guides