WireTheSun

Inverter sizing: running power and starting loads

Plan inverter power around simultaneous loads, starting demand, system voltage and the intended source of electricity.

Compare inverter needs in a solar plan →

What runs together?

An inverter must supply the loads that can operate at the same time. A fridge, pump or power tool can require substantially more power at startup than its normal running demand. Keep continuous W, apparent VA and surge specifications distinct when checking the manufacturer’s data.

Battery current changes the wiring

For the same output power, a lower battery voltage requires more DC current. An ideal 1,200 W load at 12 V already implies 100 A before losses. Check the battery discharge limit and the actual cable run, not just the inverter’s headline wattage.

Match the installation goal

Backup, off-grid and grid-connected systems need different arrangements. Use the planner to describe the supply and expected loads, then confirm the selected inverter, charging behaviour, switching and local connection requirements with a qualified installer. A sizing result is not permission to connect to the grid.

These tools support planning and discussion. An installer must check equipment ratings, protective devices, local requirements and the installation itself before work begins.

Practical planning guides